Module |
Channel |
Protocol |
Level |
Isolated |
Comment |
X-CAN-2i |
2 |
CAN |
CAN |
Channel |
2 channel CAN-bus-module (high speed): corresponding to CAN specification 2.0A and 2.0B, 2 independent CAN-channels with high speed transceiver (max. 1 MBit/s) each, galv. isolated. |
X-DPS-1i |
1 |
PROFIBUS |
RS-485 |
Channel |
1 Channel PROFIBUS-DP Slave: compatible with IEC 61158 standards, automatic baud rate detection from 9,6 K to 12 MBit/s, RS-485 galv. isolated. |
X-DPS-2i |
2 |
PROFIBUS |
RS-485 |
Channel |
2 Channel PROFIBUS-DP Slave: compatible with IEC 61158 standards automatic baud rate detection from 9,6 K to 12 MBit/s, RS-485 galv. isolated each channel. |
X-SCC-2 |
2 |
async/sync |
RS-xxx |
no |
2 universal serial interfaces with ESCC: for sync, async, SDLC, HDLC, bisync., etc. baudrate generator, DPLL and FIFO each channel, sundry clock-configurations possible, physical. interfaces each channel as RS-232, RS-422 or RS-485 configurable. With RS-4xx bus termination resistor via software switchable. |
X-SSI-2 |
2 |
SSI |
RS-422 |
no |
2 channels synchroneous serial interface (SSI). |
X-ETH-100 |
1 |
Ethernet |
100 BaseTx |
yes |
Ethernet-Modul: 10/100 MBit, inkl. Software. Auch als 10 MBit, 10 BaseT verfügbar. |
X-ETH-4c |
1 + 4 |
Ethernet + seriell async |
100 BaseTx + RS-xxx |
yes |
Ethernet- and 4 channel serial module: 10 BaseT and 4x serial, asynchronous interfaces, 2 x RS-232/RS-422/RS-485 switchable via software, 2 x RS-232 incl. modHM-control lines |
X-COM-4 |
4 |
async |
RS-232, -422, -485 |
Channel |
4 asynchronous, serial interfaces: PC-compatible UARTs. For 2 channels RS-232/RS-422/RS- 485 switchable via software, 2 channels RS-232 incl. all modHM-control lines. |
X-COM-8i |
8 |
async |
RS-232, -422, -485 |
Channel |
8 asynchronous serial RS-232 (inkl. RTS/CTS) interfaces: channels galv. isolated, PCcompatible UARTs with 64 Byte FIFO per channel and direction, any desired baud rates up to 460 Kbaud. |
X-56K-FU |
1 |
Modem |
Analog |
yes |
Analog modem: data rate up to 56 kBit/s, radio-controlled clock, audio-interface (Codec), standby and wake-up. |